CHIEF XVAUB - Manual (Page 8)

XVAU Installation Instructions
8
WARNING: Display may be very heavy! Ensure display
may be safely lifted and maneuvered as required to install on
cart. Failure to take adequate precautions can result in
serious personal injury or damage to equipment!
NOTE: Camera shelf height may need to be raised in order to
make room for display installation. See Camera Mount
Height Adjustment Section for details.
7. Position latches on interface uprights so that they are in the
“open” position. (See Figure 7)
8. Hang interface uprights (B) on head assembly. (See
Figure 7)
Figure 7
IMPORTANT ! : In order to ensure an even mount, install
uprights to be centered over cart assembly. Do NOT
install both uprights to the same side of cart assembly!
(See Figure 8)
Figure 8
9. Move latches on interface uprights to the “closed” position
to secure display to head assembly. (See Figure 9)
Figure 9
10. Snap four upright covers (A) onto uprights. (See Figure 10)
NOTE: Tabs on inside of covers (A) will snap directly into holes
on uprights to ensure a secure connection.
11. (Optional) Use padlocks (not provided) to secure uprights to
head assembly. (See Figure 10)
Figure 10
open position
7
7
8
8
head assembly
9
9
9
9
(column not shown for clarity)
(A) x 4 10
11
(B) x 2
(column not shown for clarity)