Contemporary Research ICC2-ATSC+ Manual - Manual (Page 14)

Contemporary Research 14 ICC2-ATSC
On-Screen Menus (HD2 Mode)
Main Menu
Selects sub-menus.
 Arrow keys highlight option
 Select (or Enter) chooses option
 Menu steps back or exits menus
 Exit exits all menus
 Some options are only available if you are currently
tuned to an analog or digital channel
Channel Menus
Sub-Menu for Channels offers options for:
 Channel Auto-Scan
 Favorite Channel Selection
 Add/Delete Channels
 Fine Tune (If tuned to an analog channel)
 Signal Strength Meter
Auto-Scan
Starts scan of analog and digital channels for:
 Air – looks for NTSC and ATSC channels
 Cable Auto – looks for analog and digital QAM cable
channels, as well as all frequency plans
 Cable STD - standard cable spacing
 Cable HRC – HRC cable spacing
 Cable IRC – IRC cable spacing

Tip:
Normally, use Auto. Most cable channels will be in standard
frequencies. If all the channels tune in STD but channels 5
and 6, scan for IRC. If few channels can be found, scan for
HRC.