AAON BL-600 - Manual (Page 51)

51
Water/Glycol System
1. Has the entire system been flushed and pressure checked? Yes No
2. Have isolation valves to the boiler been installed? Yes No
3. Has the entire system been filled with fluid? Yes No
4. Has air been bled from the heat exchangers and piping? Yes No
5. Is there a minimum load of 50% of the design load? Yes No
6. Has the water piping been insulated? Yes No
7. Is the glycol the proper type and concentration (N/A if water)? Yes No
8. What is the freeze point of the glycol (N/A if water)? ______________________________
Boiler Configuration
No Water Leaks Boiler Water Flow ________ gpm
Boiler Safety Check Boiler Building Water Flow ________ gpm
Pumping Package
hp L1 L2 L3 Flow (gpm)
Boiler Building Pump #1
Boiler Building Pump #2
Boilers
Boiler Water In Temperature ________°F Boiler Water Out Temperature ________°F
Boiler Amps Boiler Amps
1 3
2 4