ALLIED Vision Technologies Bigeye G-1100 Cool - Manual (Page 41)

Camera interfaces
Bigeye G Technical Manual V2.1.0
41
Camera interfaces
This chapter gives you information on Gigabit Ethernet port, inputs and outputs
and trigger features.
Gigabit Ethernet port
The Gigabit Ethernet port conforms to the IEEE 802.3 1000BASE-T standard for
Gigabit Ethernet over copper. We recommend connecting the Bigeye G using
Category 5e or better patch cables and connectors for best performance.
Note

For a detailed description of the camera interfaces
(GigE, I/O connector, status LEDs), and operating instruc-
tions see the Manta/Bigeye G Hardware Installation Guide
(How to install a GigE camera: Manta and Bigeye G), Chapter
Camera interfaces.
Read all Notes and Cautions in the Manta/Bigeye G Hardware
Installation Guide (How to install a GigE camera: Manta and
Bigeye G), before using any interfaces.
www

For accessories like cables see:
http://www.alliedvisiontec.com/emea/products/
accessories/gige-accessories.html
Note

Cable lengths up to 100 m are supported.
The 8-pin RJ45 (8P8C) connector has the pin assignment
according to the Ethernet standard (IEEE 802.3 1000BASE-T).
The GigE port of a Bigeye G camera is screw-lockable.
Accessories
Cables are available from AVT:
http://www.alliedvisiontec.com/emea/products/accesso-
ries/gige-accessories.html
Ask your local dealer for more details.