ALLIED Vision Technologies Bigeye G-1100 Cool - Manual (Page 7)

Introduction
Bigeye G Technical Manual V2.1.0
7
Introduction
This Bigeye G Technical Manual describes in depth the technical specifications,
dimensions, all pixel formats, bandwidth and frame rate related subjects.
For information on hardware installation, safety warnings, pin assignments on
I/O connectors and GigE port connectors read the AVT GigE Installation Man-
ual.
For information on camera features (camera controls) read the AVT GigE
camera and driver attributes document.
Document history
Note

Please read through this manual carefully.
We assume that you have read already the AVT GigE
Installation Manual and that you have installed the required
hardware and software on your PC or laptop (Gigabit Ethernet
network card, cables).
http://www.alliedvisiontec.com/emea/support/downloads/
product-literature/hardware-installation-guide.html
Version Date Remarks
V2.0.0 14.09.12 New Manual - COMMERCIAL RELEASE status
V2.1.0 08-July-2013 • Updated RoHS (2002/95/EC) to RoHS (2011/65/EU)
• Updated Specifications -> Power requirements (inrush
current)
• Added „Surge“ warning
• Corrected number of cycles of Bigeye G-629B Cool / Bigeye
G-629B NIR Cool shutter
• Corrections derived from terminology alignment
Table 1: Document history