Datamax-O'Neil DMXrfNetIII - Manual (Page 13)

I n s t a l l i n g t h e P r i n t e r D r i v e r 11
Installing the Printer Driver
The following screen shots are taken from Windows 2000, other Windows versions will be similar.
1
Start the Windows
“Add Printer Wizard”.
The following screen
should appear, click
‘Next>’.
2
Make sure that ‘Local
Printer’ is selected
and then click ‘Next’.
3
Select on ‘Create a
new port:’ and then
select ‘Standard
TCP/IP Port’ from the
drop down menu.
Click ‘Next’
4
Click ‘Next’.
5
In the ‘Printer Name
or IP Address:’ field
enter the IP address
or NetBIOS name of
your printer. The ‘Port
Name’ field does not
need to be changed.
When finished click
‘Next’.
6
Make sure ‘Standard’
is selected and then
click ‘Next’.
7
Confirm your settings
and then click ‘Finish’.
8
Click on ‘Have Disk’.