Datamax-O'Neil Workstation series Programmer’s Guide - Manual (Page 32)

1 | Programmer’s Guide
Thermal Printer Programmer’s Guide 26
PJL INFO Read-Back Command
This command is used to read back printer information. In addiction to standard
parameters the following table are also available, where:
<ESC>%-12345X@PJL INFO xxx <LF>
@PJL EOJ <LF>
<ESC>%-12345X
“xxx” is the desired parameter as noted below:
Table 11: PJL INFO Read-Back Command Parameters
The following is a sample DATETIME response:
@PJL INFO DATETIME
Wed Jan 4 10:53:44 EST 2012
The following is a sample SENSORS response:
@PJL INFO SENSORS
HEADTEMP=265;
MOTORTEMP=135;
HEADVOLTAGE=271;
HEADPRESSURE=7;
RIBBONLEVEL=0;
REWINDERLEVEL=0;
HEADUP=0;
HEADUNLATCHED=0;
PRESENTSENSOR=0;
CUTTERHOME=0;
COVEROPEN=1;
HEADTEMPADC=226;
Parameter Description
DATETIME Returns the date and time from the printer.
SENSORS Returns value of system sensors.
SYSTEMSTATUS Returns system status
SYSTEMINFO Returns system info.
MEDIAFILES Returns list of internal media setup files.
SETUPFILES Returns list of internal user setup files.
LABELFILES Returns list of internal user labels files.
LANGUAGEFILES Returns list of language files.
FONTFILES Returns list of user font files.
RESIDENTFONTS Returns list of resident and downloaded fonts.
IMAGE FILES Returns list of internal images