Draw-Tite 75707 MAX-FRAME RECEIVER - Manual (Page 2)

Installation Instructions
GMC Sierra/Chevrolet Silverado 2500 & 3500 HD Pickups.
(All inc. Regular, Crew, Extended & Dually - 2 & 4WD Long & Short bed)
GMC Denali HD Crew-Cab Pickup .
Part Numbers:
75707
87602
44653
75501
75501
Remove this bolt
Trim plastic if needed in area
shown on short bed trucks
Looking up underneath passenger side frame rail,
showing plastic spare tire shield
short-bed. Leave
shield in place
between frame and
hitch bracket.
Plastic spare tire shield
Picture 1.
Magnified view from previous page showing detail
of bolt-on brackets for short-bed trucks ONLY.
Figure 2.
6
7
This slot not used on
short-bed trucks.
9/16” Heavy
flat washer
supplied.
Use if
needed on
top of block
between
frame and
hitch.
*3
*4
*4 *5
Conical toothed washers
and nuts on back side
(not shown)
*8
Universal bolt-on
bracket, use on
short-bed only.
Typical both sides
Insert block
between bottom of
frame and top of
bolt-on bracket.
Drop bolt down
thru frame, block
and bracket.
Use these fasteners when
installing bolt-on brackets
only. Conical toothed
washers and nuts used
other side. (not shown)
Tighten 1/2”-13 Gr.5 bolts with torque wrench to 75 Lb.-Ft. (102 N*M) Tighten M14 x 2.0 CL10.9 bolts to 115 Lb.-Ft. (156 N*M).
z 2010 Cequent Performance Products Sheet 2 of 6 75707N 9-24-10 Rev. B
Note: check hitch frequently, making sure all fasteners and ball are properly tightened. If hitch is removed, plug all holes in trunk pan or other body panels to
prevent entry of water and exhaust fumes. A hitch or ball which has been damaged should be removed and replaced. Observe safety precautions when working
beneath a vehicle and wear eye protection. Do not cut access or attachment holes with a torch.
This product complies with safety specifications and requirements for connecting devices and towing systems of the state of New York, V.E.S.C. Regulation V-5
and SAE J684.
Form: F205 Rev A 5-6-05