Adder Technology X200 - Manual (Page 6)

wel
c
ome
c
ontent
s
inst
all
ation
&
op
era
tion
sp
ecial
c
onfigura
tion
fur
t

er
informa
tion

Connections at each CAM (local) unit
1 Where possible ensure that power is disconnected from the system(s) to be
connected. For CAMs with PS/2 keyboard and mouse connections, see Hot.
plugging.PS/2-style.connections.and.mouse.restoration .
2 For each CAM, attach its various connectors to the relevant sockets on the
computer system.
4 For each cable run, attach the cable connector to the
socket of the CAM. The other end of each cable run
will attach to the remote X200 module.
Computer
Access
Module
Category , e or 6 cable
to X00 module
Green indicator - power present
Yellow indicator - signal activity
Note: CAMs derive power from the
computer system via the USB connector.
3 Lay a suitable length of category 5, 5e or 6 cabling between each computer
system/CAM and the location of the remote peripherals - see Cable.length.
advice .
Video.
PS/2-style.mouse
PS/2-style.keyboard
Audio
USB.keyboard/mouse
Sun.keyboard/mouse
A range of different
connector combinations
are made available
across the five CAM
formats