Draw-Tite 9480 HIDE-A-GOOSE FIFTH WHEEL ADAPTER - Manual (Page 7)

Chart 1
See Steps
3A and 3B
Year Vehicle Fit Center-Section Offset
88-
10 GM 1500/2500/3500
including CKSeries (6’
& 8’ Beds) Rearward
3A and 3B
below for
spring
adjustment
04-
10 Ford F-150 6’ & 8’
Beds Forward
99-
10 Ford F-250/F-350/F-
450 6’ & 8’ Beds Rearward
94-
10 Dodge
1500/2500/3500 6’ &
8’ Beds Rearward
07-
10 Toyota Tundra 6’ & 8’
Beds Forward
3A. To assemble the spring , use the ¼” bolts, washers, spacers and springs from the fastener kit. See Figure 10A.
Spring
Spacer
Center Section
¼” Washer
¼” Bolt
Figure 10A
3B. The coil of the spring ( See Figure 10B ) is facing the rear of the truck and wide hook sits over the center section casting as
shown in Figure 10C Assemble and tighten ¼” bolts into the thread holes in the casting.
Figure 10B Figure 10C
Center Section Casting
Wide Hook
Coil of Spring
Rear of truck
z 2010, 2011 Cequent Performance Products Sheet 7 of 12 9480N 6-22-11 Rev. C