Draw-Tite 9480 HIDE-A-GOOSE FIFTH WHEEL ADAPTER User Manual
Page 8
4.
Assemble the plastic strips to the bottom of the legs on the base assembly, using the 5/16 X 1.50 screws, flat washers, and
nylon lock nuts. The plastic strips are used to prevent rotation of the hitch and should be aligned so that they sit between
the corrugations of the bed as shown in Figure 11B.
NOTE: For the Toyota Tundra the plastic strips should be aligned so that the outer edge of the plastic strip is aligned with
the outer corrugation (see figure 11C).
FIGURE 11A
Pl ti St i
Nylok Nut
Flatwasher
Longer legs
Should be
positioned
towards the
vehicle cab
FIGURE 11A
Plastic Strip
5/16 X 1.50
Phillips Head
Machine Screw
Plastic strips supplied with
this hitch are 1/2” thick.
3/8” thick plastic strips, part
number 58438, are available
for trucks with bed
FIGURE 11B
corrugations that are
shallower.
Truck Bed
Corrugations
Plastic Strip
Shown In
Position
Toyota Tundra
z
2010, 2011 Cequent Performance Products
Sheet 8 of 12
9480N
6-22-11
Rev. C
FIGURE 11C – Toyota Tundra
Toyota Tundra
Truck Bed
Corrugations
Plastic Strip
Shown In
Position