EXP Computer CDG-821 User Manual
Page 11
- -
6
INSTALLING THE BATTERIES
The CD TRAVELER requires eight AA size batteries (not included) for
operation. When using alkaline batteries, the battery life may last for
more than 3 hours if the CD TRAVELER is used in CD-ROM mode, it
can be even longer when the CD TRAVELER is used in CD-Audio
mode. You can also use NiCad rechargeable battery’s which have a
shorter service life. Both the rechargeable battery and the re-charger
are NOT provided with this unit.
To install the batteries, follow the instruction below:
1. Remove the disc from the CD-ROM.
2. Power off the CD-ROM by disconnecting the PCMCIA interface card
from your computer.
3. Turn over the CD-ROM drive and place horizontally.
4. Press and slide the battery lid in the direction of the arrow to remove
it. (As shown in Figure 3)
Figure 3
5. Install eight fresh AA batteries in the order as illustrated in Figure 4,
and make sure polarities are aligned properly. It is recommended that
you follow the order in the illustration to install the batteries with ease.
6. Please note that the battery ribbon must be arranged as shown in
Figure 4. Otherwise, it will be difficult to remove the batteries.
7. Replace the battery lid.