EXP Computer CDG-821 - Manual (Page 29)

- - 24
EMM386 line of CONFIG.SYS to exclude at least 4K memory for
mapping. For example,
DEVICE=C:\DOS\EMM386.EXE ... X=D000-D3FF
v v
Error: The INTEL 82365SL PCMCIA controller is not
detected in your system. You should contact your
dealer to get PCMCIA support software.
The above message means the PCMCIA controller for your system is
not INTEL 82365SL compatible. In this case, you should install PCMCIA
support software which should be supplied by the notebook
manufacturer.
v v
CD-ROM Drive is not found!
The above message means EXPCDG.EXE can't find the CD
TRAVELER drive. Please make sure the CD-ROM drive is properly
connected to the PCMCIA interface card cable and the power cord is
connected(or batteries are loaded).
Error message generated by MSCDEX.EXE:
v v
Device driver not found: 'MSCD001'
This means that EXPCDG.EXE is not installed properly or you have
entered a different
/D: switch in the MSCDEX line of AUTOEXEC.BAT.
The /D: switch must be the same as the /D: switch in the EXPCDG.EXE
line of CONFIG.SYS.
If the error message displayed is none of the above, please contact your
dealer to obtain customer support.