EXP Computer CDG-821 - Manual (Page 28)

- - 23
DOS/Windows3.X
After rebooting your computer, the following messages will be displayed
on your screen, which are generated by EXPCDG.EXE and
MSCDEX.EXE.
Configure card to:
I/O Port:320-32F, 200-207
Device Name: MSCD001
PCMCIA card is present in socket 1
.
.
.
Drive D: = Driver MSCD001 unit 0
If any error occurs or the CD TRAVELER does not work, you should
reboot your computer again. When the system displays 'Starting MS-
DOS...', press the F8 key to make the system executes the
CONFIG.SYS and AUTOEXEC.BAT step by step, so that you can
consistently press the ‘Y’ key to see each command's message.
Error messages generated by EXPCDG.EXE:
v v
Error: PCMCIA card is not present!
If the above message appears, it means EXPCDG.EXE can't find any
PCMCIA card in your PCMCIA slots. Make sure the card is inserted
firmly.
v v
Error: Illegal I/O port!
The above message means invalid I/O ports in the EXPCDG line of
CONFIG.SYS has been selected. The legal I/O port numbers are: 1, 2,
and 3.
v v
Error: There is no available 4K memory for mapping!
The above message means EXPCDI can't find available 4K memory
between C000:0 to EFFF:0. This error can be corrected by changing the