EXP Computer CDG-821 - Manual (Page 15)

- - 10
SOFTWARE INSTALLATION FOR DOS/WINDOWS 3.1
The INSTALL program helps you install the device driver into the
computer easily. Please follow the instructions below to proceed with
automatic installation.
1. Insert the device driver diskette into a floppy disk drive on your
computer.
2. Change the working directory to the floppy drive containing the
device driver diskette by typing “
A: ” or “ B: ” then press ENTER.
3. At the DOS prompt (A:\> or B:\>), type “ INSTALL ” followed by the
ENTER key.
4. Press ENTER or click on the OK button to continue. When the
opening screen appears, a dialog box will be displayed for you to
specify the 1), directory to install the device driver; 2), the DOS
directory to specify the location of the MSCDEX driver, 3), the
I/O port and 4),the IRQ desired for the CD TRAVELER. Enter the
directory you select to install the driver and press the TAB key to
forward to the next field to indicate the DOS Directory. Press the
TAB key again to set the I/O port. The default setting of the I/O
ports are (320-32F and 200-207). After completing the selection,
click on the Install button to continue.