Burkert Type 2712 - Manual (Page 5)

5
Intended use
3. intenDeD use
The manually actuated valve types 2000, 2012, 2702 and 2712 are
designed to control the flow rate of liquid media.
• Observe the permitted application conditions for using the equipment.
• Operate only when in perfect condition and pay attention to correct
storage, transportation, installation and operation.
danger – high pressure!
• Turn off the pressure and vent the lines before loosening lines
or valves.
to prevent injuries/damage:
• Secure system/equipment from unintentional activation.
• Only supply fluids into the media connections that are specified
in section “5. Technical data”.
• Do not make any internal or external changes.
• Only trained technicians may perform installation and maintenance
work.
• Do not apply a mechanical load to the body.
• Observe the general regulations of technology.
4. general infOrmatiOn
4.1. contact addresses
germany
Bürkert Fluid Control Systems
Sales Center
Christian-Bürkert-Str. 13-17
D-74653 Ingelfingen
Germany
Tel. + 49 (0) 7940 - 10 91 111
Fax + 49 (0) 7940 - 10 91 448
Email: [email protected]
international
Contact addresses can be found on the Internet at:
www.burkert.com
4.2. Warranty
The warranty is only valid if the manually actuated valve is used as
intended in accordance with the specified application conditions.
4.3. information on the internet
The operating instructions and data sheets for types 2000, 2012, 2702
and 2712 can be found on the Internet at:
www.burkert.com
english
Types 2000, 2012, 2702, 2712