Burkert Type 6211 User Manual

Page 3

Advertising
background image

8

The device may be operated only when in perfect

condition and in consideration of the operating

instructions.
The general rules of technology apply to application

planning and operation of the device.

Type 6211 EV was developed with due conside-
ration given to accepted safety rules and is state-
of-the-art. Nevertheless, dangerous situations may
occur.

Failure to observe this operating manual and its ope-
rating instructions as well as unauthorized tampering with
the device release us from any liability and also invalidate
the warranty covering the devices and accessories!

english

9

gEnEral infOrmaTiOn

5.

scope of supply

5.1.

Check immediately upon receipt of the delivery that the con-
tents are not damaged and that the type and scope agree
with the delivery note and packing list.
If there are any discrepancies, please contact us immediately.

contact addresses

5.2.

germany

Bürkert Fluid Control Systems
Sales Center
Chr.-Bürkert-Str. 13-17
D-74653 Ingelfingen
Tel. + 49 (0) 7940 - 10 91 111
Fax + 49 (0) 7940 - 10 91 448
E-mail: [email protected]

international
Contact addresses can be found on the final pages of the
printed operating instructions.
And also on the Internet at:

www.burkert.com

Bürkert Company Locations

english

10

Warranty

5.3.

This document contains no promise of guarantee. Please refer
to our general terms of sales and delivery. The warranty is only
valid if the Type 6211 EV is used as intended in accordance
with the specified application conditions.

The warranty extends only to defects in the
Type 6211 EV and its components.
We accept no liability for any kind of collateral
damage which could occur due to failure or mal-
function of the device.

licenses

5.4.

The approval rating on the Bürkert labels refers to Bürkert
products.

information on the internet

5.5.

The operating instructions and data sheets for Type 6211 EV
can be found on the Internet at:

www.burkert.com

Documentation Type 6211 EV

english

11

6. TEchnical daTa

Operating conditions

6.1.

The following values* are indicated on the rating
plate:

Voltage

(tolerance ±10 %) / current type

Coil power consumption

(active power in W - at operating temperature)
Pressure range

Housing material

brass (MS) or stainless steel (VA)
Seal material

FKM, EPDM, NBR

* see description of rating plate below

Operating principle 2/2-way valve:

A (NC)

A

P

Protection class:

IP65 in accordance with DIN EN
60529 / IEC 60529 with correctly
connected and installed device
socket, e.g. Bürkert Type 2507

english

Type 6211 EV

Advertising