Avocent CCM1640 - Manual (Page 60)

54 CCM840/1640 Installer/User Guide
Help Command Parameter
Parameter Description
<command_name> Command name.
Default: Displays list of all commands
Examples
The following command displays information about the Show Server
CLI command.
help sho ser cli
The following command displays a list of all commands.
help
Port Commands
The Port command has several forms, as listed in the following table.
Port Command Summary
Command Description
Port Alert Add Adds a port alert string to a specifi ed port.
Port Alert Copy Copies port alert strings from one port to another port.
Port Alert Delete Deletes one or more port alert strings from a specifi ed port.
Port Break Sends a serial break signal to the attached device.
Port History Accesses a port’s history mode.
Port Logout Terminates the CCM session on a specifi ed port.
Port Set Changes CCM serial port settings for one or all ports.
Port Alert Add command
The Port Alert Add command adds a port alert string to a specified port. Each
port may have up to ten port alert strings. Duplicate strings are not allowed on
the same port. To generate a trap, the Server SNMP Trap command must be
issued to enable the portAlert trap. For more information, see Managing the
CCM Using SNMP in Chapter 3.
Access right: SCON or PCON
Access level: ADMIN or APPLIANCEADMIN
Syntax
PORT <port> ALERT ADD “<string>”