Avocent CCM1640 - Manual (Page 74)

68 CCM840/1640 Installer/User Guide
Access right: SCON
Access level: APPLIANCEADMIN
Syntax
SERVER SNMP COMMUNITY [READCOMM=<name>]
[WRITECOMM=<name>] [TRAPCOMM=<name>]
Server SNMP Community Command Parameters
Parameter Description
READCOMM= < name > 1-64 alphanumeric character read community name.
Default = public
WRITECOMM =< name > 1-64 alphanumeric character write community name.
Default = public
TRAPCOMM= < name > 1-64 alphanumeric character trap community name. If you
specify this parameter, the name must be different from the
read and write community names.
Default = public
Server SNMP Manager command
The Server SNMP Manager command defines or deletes SNMP management
entities. You may define up to four management entities. If you delete all
SNMP managers (or never add any), the CCM may be accessed via SNMP
from any IP address.
For more information, see Managing the CCM Using SNMP in Chapter 3.
Access right: SCON
Access level: APPLIANCEADMIN
Syntax
SERVER SNMP MANAGER ADD|DELETE <ip_address>
Server SNMP Manager Command Parameters
Parameter Description
ADD|DELETE Adds or deletes the specifi ed SNMP management entity.
<ip_address> IP address of SNMP management entity.
Example
The following command adds an SNMP management entity with the IP
address of 192.168.0.1.
server snmp manager add 192.168.0.1