Burkert Type 1094 - Manual (Page 6)

4 - 1094
english
1.6 Guarantee provisions
1.5 Scope of delivery
Immediately after receipt of the consignment, ensure that the contents have not been
damaged, and that they agree with the scope of delivery quoted on the enclosed
packaging slip.
In case of a discrepancy, please contact our Customer Service immediately:
Bürkert Steuer- und Regelungstechnik
Kundencenter
Chr.-Bürkert-Str. 13-17
D-76453 Ingelfingen
Tel. : 07940-10111
Fax: 07940-10448
E-mail: [email protected]
or your local Bürkert distribution centre.
This document contains no agreement to provide a guarantee. We would refer you
here to our General Selling and Business Conditions. The precondition for the guar-
antee is the correct usage of the device under compliance with the specified applica-
tion conditions.
ATTENTION!
The guarantee only applies to the freedom of the Type 1094
Standard electronic controller and its components from faults. No
liability will be accepted, however, for consequential damage of
any kind that could arise from the failure or malfunctioning of the
device.
CAUTION WHEN
HANDLING!
ELECTROSTATI-
CALLY SENSITIVE
COMPONENTS /
MODULES
The device contains electronic components that are react sensi-
tively to electrostatic discharge (ESD). Contact with electrostati-
cally charged persons or objects will endanger these compo-
nents. In the worst case, they will be immediately destroyed or
will fail after commissioning.
Observe the requirements according to EN 100 015 - 1 in order
to minimise or avoid the possibility of damage through sudden
electrostatic discharge. You should also ensure that the elec-
tronic components do not come into contact with nearby supply
voltages.
1.4 Protection against damage through electrostatic charge