Burkert Type 1115 - Manual (Page 23)

23
6 Configuration of the interfaces
When the interface card (RS 232 or RS 485 / Profibus) has been installed, then appears
in the menu item "Add. Menu" of the digital unit (e.g. Digital Industrial Controller Type 1110
or
Digital Batch Controller Type 1115) the menu item "Serial" (after the menu item
"Language").
Menu for configuring Menu for configuring
the serial interface RS 232 the serial interface RS 485 /
Profibus Add. Menu
Language Serial End
Mode
local remote
Language Serial End
Mode
local remote
Add. Menu
Baud rate Address
Adr:
Parity check
Bd: 4800 Bd: 9600
Par: none Par: even PAr: odd
Address
Adr:
SELECT
ENTER