Burkert Type 1115 - Manual (Page 4)

4
2 Notices concerning use and safety
In order to ensure a perfect functioning and a long working life of the interface card
when using this card, the user is requested to follow this operating instructions and the
operating instructions of the digital units to be used with this card (e.g. Digital Industrial
Controller
Type 1110 or Digital Batch Controller Type 1115) as well as to maintain the operating
conditions and to observe the allowed specifications according to the data sheet.
Installation and maintenance personnel must be trained and qualified for this work.
All possibilites of unauthorized operation with the resulting impairment of the process are
to be ruled out through precautionary measures. For maintenance purposes, safe
electrical disconnectors and media technical shut off devices are to be provided. Should
the unit equipped with the interface card be part of a complex automation system, then
the automation system must be provided with a defined and controlled restart process
as specified in the instructions for starting up again following an interruption.
When operating the device or carrying out service and repair work on the equipment, the
regulations in force for the prevention of accidents and the safety of electrical
equipment must be observed.
Commissioning, start-up and repairs may only be carried out through authorized
specialists.