Burkert Type 7615 - Manual (Page 5)

5
Authorizeduse
2 AUTHORIZED USE
Non-authorized use of the micro dosing unit Type 7615 may
represent a hazard to people, nearby equipment and the
environment.
▶ The device is designed for the dosing of small fluid or gas quan-
tities. It must only be used for the media listed in the chapter
“6 Technical data”.
▶ Prior to the use of aggressive media, the resistance of the
media-wetted materials must be checked. Information on the
resistance of materials to the media is available from your
Bürkert sales office or on the Internet: www.buerkert.de
▶ Do not use the device outdoors without appropriate housing.
▶ Use according to the authorized data, operating conditions,
and conditions of use specified in the contract documents and
operating instructions. These are described in the chapters
“5 System description” and “6 Technical data”.
▶ The device must only be used in conjunction with third-party
devices and components recommended and authorized by
Bürkert.
▶ Correct transportation, storage, and installation, as well as care-
ful use and maintenance are essential for reliable and faultless
operation.
• The micro dosing unit must not be used in potentially explosive
areas.
• Do not operate the device without suitable filtration of the input
medium.
• Use the device only as intended.
2.1 Restrictions
If exporting the system/device, observe any existing restrictions.
3 BASIC SAFETY
INSTRUCTIONS
These safety instructions do not make allowance for any
• Contingencies and events which may arise during the installation,
operation, and maintenance of the devices.
• Local safety regulations – the operator is responsible for
observing these regulations, also in relation to the installation
personnel.
The micro dosing unit Type 7615 was developed with due
consideration of the accepted safety rules and is state-of-the-
art. Nevertheless, dangerous situations can occur.
english
Type 7615