Burkert Type 7615 - Manual (Page 7)

7
Generalinformation
4 GENERAL INFORMATION
4.1 Contact addresses
Germany
Bürkert Fluid Control Systems
Sales Center
Chr.-Bürkert-Str. 13–17
74653 Ingelfingen
Germany
Tel.: +49 (0) 7940 - 10 91 111
Fax: +49 (0) 7940 - 10 91 448
E-mail: [email protected]
International
Contact addresses can be found on the final pages of the printed
operating instructions.
And also on the Internet at:
www.burkert.com
4.2 Warranty
The warranty is only valid if the device is used as intended in accordance
with the specified application conditions.
4.3 Information on the Internet
The operating instructions and data sheets for Type 7615 can be found
on the Internet at: www.burkert.com
5 SYSTEM DESCRIPTION
Due to the high reproducibility, the unit, which operates according to
the diaphragm pump principle, is suitable for the precise dosing of
very small fluid quantities in the µl range.
The dosing unit can also be used for aggressive media as high-
quality materials are used for the parts that come in contact with the
media.
The structure of the unit with active inlet and discharge valves
enables a bidirectional supply. The electronic control systems are
integrated in the unit.
The supply rate of the dosing unit is dependent on the viscosity of
the supplied medium and the flow resistances up- and downstream
of the dosing unit (e.g. hose system).
5.1 Conformity
The micro dosing unit Type 7615 conforms to the EC directives
according to the EC Declaration of Conformity.
english
Type 7615