Burkert Type 8070 - Manual (Page 22)

20
SettingandFunctions
9.4.4. dAtA (Data) – uploading and downloading the device settings
This function is not available on a "Version 1" of the device. Refer to the name plate of the device.
The parameter makes it possible to transfer the device settings from one device to another by means of the display and con-
figuration unit.
Access the parameter:
transfer from the device
to the display and configu-
ration unit
Cancel
transfer from the display
and configuration unit to
the device
Confirm
or
rdy = data has been
transferred
Err = data transfer not
possible
Fig. 14: Data – Transfer of data from/to display and configuration unit
upload (uPLd):
When uploading, the device settings are transferred to the display and configuration unit.
After the data has been transferred, "ready" (rdy) is displayed.
If the data could not be transferred to the display and configuration unit, the error message “
Err” is displayed.
Download (dnLd):
When downloading, the device settings previously uploaded in the display and configuration unit are transferred to another
8022 device.
After the data has been transferred, "ready" (rdy) is indicated on the display.
If the data could not be transferred to the 8022 device, the error message “
Err” is displayed.
English
Type 8022