Burkert Type 8025 - Manual (Page 11)

11
Installation and wiring
Type 8025 UNIVERSAL
6.6 Electrical connection
Type▶of▶connection on▶the▶terminal▶blocks▶of▶the▶
electronics▶(and▶through▶cable▶
glands▶M16x1,5,▶for▶the▶wall-
mounted▶versions)
Cable▶specifications
•▶ cable▶type
•▶ Cross▶section▶of▶wires
•▶ Diameter▶of▶each▶cable▶(for▶
the▶cable▶glands▶M16x1,5▶of▶
the▶wall-mounted▶version)
•▶ shielded
•▶ 0.2▶to▶1.5▶mm
2
•▶ 4▶to▶8▶mm
7 INSTALLATIoN AND WIRING
7.1 Safety instructions
danger
risk of injury due to electrical voltage.
▶ ▶ Shut▶down▶the▶electrical▶power▶source▶of▶all▶the▶conductors▶and▶
isolate▶it▶before▶carrying▶out▶work▶on▶the▶system.
▶ ▶ Observe▶all▶applicable▶accident▶protection▶and▶safety▶regula-
tions▶for▶electrical▶equipment.
Warning
risk of injury due to non-conforming installation.
▶ ▶ The▶electrical▶installation▶can▶only▶be▶carried▶out▶by▶qualified▶
and▶skilled▶staff▶with▶the▶appropriate▶tools.
▶ ▶ Install▶appropriate▶safety▶devices▶(correctly▶rated▶fuse▶and/or▶
circuit-breaker);▶For▶the▶versions▶with▶a▶115/230▶V▶AC▶sup-
ply▶voltage,▶insert▶a▶safety▶device▶between▶the▶phase▶and▶the▶
neutral▶conductor.
▶ ▶ Respect▶standard▶NF▶C▶15-100▶/▶IEC▶60364.
risk of injury due to unintentional switch on of power supply
or uncontrolled restarting of the installation.
▶ ▶ Take▶appropriate▶measures▶to▶avoid▶unintentional▶activation▶of▶
the▶installation.
▶ ▶ Guarantee▶a▶set▶or▶controlled▶restarting▶of▶the▶process▶subse-
quent▶to▶any▶intervention▶on▶the▶device.
English