ELRO CR1 WLAN Repeater USERS MANUAL - Manual (Page 42)

802.11n WiFi Repeater User’s Manual
42
Field Description
SSID Specify the network name.
Each Wireless LAN network uses a unique Network Name to
identify the network. This name is called the Service Set Identifier
(SSID). When you set up your wireless adapter, you specify the
SSID. If you want to connect to an existing network, you must use
the name for that network. If you are setting up your own network
you can make up your own name and use it on each computer. The
name can be up to 20 characters long and contain letters and
numbers.
Encryption Configure the Encryption to Disable, WEP, WPA(AES) , WPA2(AES)
or WPA-Mixed
Key Length Select the Key Length 64-bit or 128-bit
Key Format Select the Key Format ASCII (5 characters), Hex (10 characters),
ASCII (13 characters) or Hex (26 characters)
Encryption Setting Enter the Encryption Key
Pre-Shared Key
Format Configure the Pre-Shared Key Format to Passphrase or HEX (64
characters)
Pre-Shared Key Type the Pre-Shared Key