ELRO CR1 WLAN Repeater USERS MANUAL - Manual (Page 52)

802.11n WiFi Repeater User’s Manual
52
12
Save/Reload Settings
This page allows you save current settings to a file or reload the
settings from the file which was saved previously.
Besides, you could reset the current configuration to factory
default.
If you do make changes to the default configuration but then
wish to revert back to the original factory configuration, you can
do so by resetting the device to factory defaults.
Save Settings to File
It allows you save current settings to a file.
1. From the left-hand Management menu, click on Reset
factory default. The following page is displayed:
Figure 5: Reset to Defaults page
Option Description
Save Settings
to File
Save the Settings to a File
Load Settings
from File
Load Settings from a File
Reset
Settings to
Default
Reset Settings to Factory Default