Settings menu, Choosing desired option from the configure menu, Wi-fi and network setup – Grace Digital GDI-IRDT200 Tuner User Manual

Page 34: Network firmware upgrade

Advertising
background image

34



7. Press the ‘Select’ button.

8. Turn the Dial to select YES/NO to confirm that repeat mode should be enabled.


The Media Player allows you to play unprotected audio files (AAC, AIFF, MP3, RM, WAV, WMA)

and play lists (M3U) stored on a networked PC. Verified to work on Windows 2000 and Windows

XP.


Settings Menu

Choosing desired option from the Configure

menu

1. Press the ‘Select’ button.

(Note: if you make a mistake at any point, press the ‘Back’ button to go back to the previous

screen.)

2. Turn the Dial until ‘Settings’ is displayed


3. Press the ‘Select’ button.

4. Turn the Dial until the display shows the option you want.


5. Press the ‘Select’ button to choose the option shown on the display. The options are

explained below.

<Wi-Fi and Network Setup>

Enables you to scan again for connection to another wireless network, or to manually configure
the network parameters. Use this if you take the Internet tuner to another building where you
want to use it, or if you change your wireless router.

<Network Firmware Upgrade>

Use this option to download new firmware (also referred to as Service Pack or Version on your
Tuner) for the Tuner from the Grace Digital portal on the Internet. If there is new firmware
available, the tuner will prompt you if you want to download it or not. Note, at this stage, you

Advertising
This manual is related to the following products: