Clear-Com RS-603 (No longer available) - Manual (Page 49)

V - P A C K I N S T R U C T I O N M A N U A L
6 - 5
M IC G AIN A CCESS
When you clear the Mic Gain Access check box, a beltpack user cannot change
the microphone’s outgoing volume levels from the beltpack’s onboard controls. A
beltpack user can adjust incoming headset volume with the beltpack’s volume
control knob.
M ONAURAL (M ONO )/B INARUAL A CCESS
When you clear the Mono/Binaural Access check box, a beltpack user cannot
select between monaural and binaural headset audio by using the beltpack’s
onboard controls. Only the default monaural audio is available.
E NABLE A LL A CCESS
When checked, this global feature automatically selects all Access options for a
beltpack so that all options are available to the beltpack user through the
beltpack’s onboard controls.
D ISABLE A LL A CCESS
When checked, this global feature automatically clears all Access check boxes for
a beltpack so that these options are unavailable to the beltpack user through the
beltpack’s onboard controls.
This feature differs from a beltpack’s onboard lockout ability because with
V-Pack you can also disable Mode Select.
PC COMMUNICATIONS PORT
In the PC Communications Port area of the screen, you can select among eight
PC Communications (“COM”) port settings for connecting the VPC-1 cable
and beltpack to a PC. Click a COM port number to select that port.
INTERCOM LINE LEVEL
In the Intercom Line Level area of the screen, you select between
ClearCom-compatible and RTS-compatible intercom line levels for each mode.
To select a line level, click that option.