Clear-Com V12PDDXY - Manual (Page 104)

3. Press a key with the associated flashing green status LED or the pushbutton or talk
button or rotary control of an available member to add it to the partyline.
The status LED or pushbutton or talk button or rotary encoder becomes
solid green
to indicate the member has been added to the partyline.
Note:
To remove a member from the partyline, press that member’s key. The solid green
status LED or pushbutton or talk button or rotary control associated with that key
flashes green to indicate it is available again.
4. Repeat steps 6 and 7 until the partyline contains all desired members.
5.12.3 Assigning Fixed Group members
Note:
Talk and listen keys are the only valid members of a Fixed Group.
To assign Fixed Group members to a talk or listen key:
1. Press the ASSMNT PNL key or talk button three times, until FG is displayed on the
Reply key.
All available partyline status LEDs, pushbuttons or talk buttons
flash red .
2. Press the key, pushbutton or talk button for the required Fixed Group.
The key’s status LED or talk button is lit
solid red and all available members’ status
LEDs or pushbuttons flash green . In the case of rotary panels, if a talk label is
available the talk button will flash green and if a listen label is available the rotary
encoder will flash green.
3. Press a key with the associated flashing green status LED or the pushbutton or talk
button or rotary control of an available member to add it to the Fixed Group.
The status LED or pushbutton or talk button or rotary encoder becomes
solid green
to indicate the member has been added to the Fixed Group.
Note:
To remove a member from the Fixed Group, press that member’s key. The solid
green status LED or pushbutton or talk button or rotary control associated with that
key
flashes green to indicate it is available again.
4. Repeat steps 6 and 7 until the Fixed Group contains all desired members.
104 V-Series Panels User Guide