Clear-Com V12PDDXY - Manual (Page 123)

Assigning IP addresses
It is important to ensure that the panel IP address does not clash with any other IP address
on the network (another device is using the same IP address).If there is an IP address clash,
the panel may repeatedly lose the connection with the IVC-32 card, and may also cause the
IVC-32 card to crash.
Note:
Clear-Com recommends that DHCP is used wherever possible to automatically assign IP
addresses rather than assigning IP addresses manually in order to reduce the risk of an
address clash. For more information, see 6.3.4
DHCP menu .
6.3.2 IP GATEWAY menu
Figure 144: IP Gateway menu for rack mounted panels
Figure 145: IP Gateway menu for desktop panels
Use the CLEAR key to clear the current IP Gateway address for the panel, and then enter
the new IP Gateway address.
In lever key and pushbutton panels, use the up / down buttons to select the digits. For rotary
panels, press the rotary control to select the left digit and the talk button to select the right
digit.
Each time a digit is selected the cursor will advance to the next digit automatically. Pressing
the lever key down or the pushbutton or the rotary control will step back to the previous digit.
When the IP Gateway for the panel has been entered exit the menu using the IP GATEWAY
key or talk button.
123 V-Series Panels User Guide