Clear-Com V12PDDXY - Manual (Page 26)

3.5 Supported fonts in V-Series panels
Font Description / comments
Basic Latin
The backslash is a Yen character. This is a size-maximized font (no
descenders, lower-case characters are not relative in size to upper-
case characters). This covers Unicode 32 to 127 (decimal), 0x20 to
0x7F (hex).
The V-Series panel display will support ten characters.
Cyrillic
This is a normal, relatively-sized font. Covers Unicode 1024 to 1279
(decimal), 0x400 to 0x4FF (hex) with some missing characters.
The V-Series panel display will support ten characters.
Hiragana
This covers the codepoint range 12352 to 12447 (decimal), 0x3040
to 0x309F (hex).
The V-Series panel display will support five characters.
Full-width
Katakana
The V-Series panel display will support five characters, as this is a
normal width font.
This covers the codepoint range 12448 to 12543 (decimal), 0x30A0 to
0x30FF (hex) with some missing characters.
Kanji
Displays 17,000 out of the 21,000 characters. This covers the
codepoint range 19968 to 40895 (decimal), 0x4E00 to 0x9FBF (hex).
The V-Series panel display will support five characters.
Hangul The range is 44032 to 55215 (decimal), 0xAC00 to 0xD7AF (hex).
The V-Series panel display will support five characters.
Half-width
Katakana
The codepoint range is 65376 to 65440 (decimal), 0xFF60 to 0xFFA0
(hex).
The V-Series panel display will support ten characters.
Arabic
The character range supported on the VSeries panel is the Basic
Arabic character set 0x0600 to 0x06FF.
Table 5: Supported fonts
26 V-Series Panels User Guide