1 headset sidetone, 2 headset autodetect, Headset sidetone – Clear-Com V12PDDXY User Manual
Page 157: Headset autodetect
7.5.1 Headset sidetone
Sidetone is the sound of the user’s voice in his headset.
For information about adjusting sidetone, see your ECS / EHX documentation.
7.5.2 Headset autodetect
V-Series panels can autodetect headsets 1 and 2 and automatically enable them. Headset
auto detect can be set to enabled or disabled via a DIP switch (SW2) on the main board. As
headset insertion can cause a noise on the panel some users may wish to disable automatic
headset detect and use the front panel button instead to enable and disable the headsets.
To access the DIP switch the rear cover must be removed from the panel.
The DIP switch is located on the right hand edge of the main PCB (looking from the rear)
behind the headset connector.
Figure 186: DIP switch location (headset detect)
157
V-Series Panels User Guide