Hach-Lange ORBISPHERE K1100_M1100 Operator Manual - Manual (Page 20)

18
Specifications
2.6 Default parameters
The table below indicates the factory default configurations. The instrument has these settings
when started for the first time.
Parameter Default settings Customer settings
Security Disabled
Measurement
Measurement mode Continuous
Measurement interval 2 seconds
Data filter Disabled
Medium Liquid
Gas unit type Dissolved
Gas unit ppm-ppb
Liquid
K1100 low and high range - Water
M1100 low range - Beer
M1100 high range - Water
Display resolution XXX.X
Storage mode Rolling buffer
User offset Disabled
Out of range protection Enabled
Temp unit °C
Pressure unit bar
Calibration
Mode Zero calibration
Hold Enabled
Auto-end Enabled
Interferences Disabled
Analog outputs
Range 4-20 mA
Outputs Gas measurement
Extended mode Disabled
Characteristics Monolinear mode
Alarm relays Disabled
Thermal cutoff Enabled
Thermal cutoff temp
K1100 - 40°C
M1100 - 30°C
Calibration timer Disabled
Service timer Disabled
Buzzer
Screen tap Enabled
Alarm sound Disabled
Display
Minigraph Enabled
Temperature Disabled