INSTEON Hub - 2242-222 (US), 2242-422 (EU), 2242-442 (UK), 2242-522 (AUS/NZ) Manual - Manual (Page 5)

Page 5 of 26 Rev: 9/27/2013 4:17 PM
Leave head screw approximately
6.35mm (.25”) gap for proper
mounting of Hub
+ +
Mount Hub on Wall (optional)
Simply screw two screws (we recommend using #6 drywall screws) through the marks in the drawing below (leaving head of
screw about ¼” from the wall) and hang Hub on the screws (you can then tear this sheet off).