Anthem Audio AVM 30-HD - Manual (Page 24)

16
3. SETUP MENU
continued …
SETTING UP THE AVM 50
When you enter the Setup Menu, your On-Screen display will show the menu below. Only 8 menu items can
be displayed at one time. To go to a submenu, highlight a menu item in red and then press SELECT.
3.1 SET TIME / TIMERS
The time and day, plus 6 different timers are set in this menu. The timers in the AVM 50 are like an alarm
clock, but allow two different timer settings for each of MAIN, ZONE2, and ZONE3.
To set Current Time and Day:
• Enter the Setup Menu. Go to ‘1. SET TIMERS/TIME’ and press SELECT.
• Press the button until you reach ‘c. TIME FORMAT: 12 Hr’.
• Use the buttons and choose ‘12 Hr’ or ‘24 Hr’.
• Press the button to go to ‘a. CURRENT TIME: 12:00 AM’.
• Press SELECT. ‘12’ will be highlighted in red.
• Use the Master Control Knob or the buttons to set the current hour.
• Press the button. ‘00’ minutes will be highlighted.
• Use the Master Control Knob or the buttons to set current minutes.
• Press BACK to return to the menu line.
• Press the button to go to ‘b. CURRENT DAY: Sunday’.
• Use the buttons to set the current day.
All Timers:
This allows you to simultaneously ‘Enable’ or ‘Disable’ all Timers for MAIN, ZONE2, and ZONE3.
ANTHEM AVM 50 SETUP MENU
1. SET TIME / TIMERS
2. SPEAKER CONFIGURATION
3. LISTENER POSITION
4. SPEAKER LVL CALIBRATION
5. SOURCE SETUP / PRESETS
6. ADJUST INPUT LEVELS
7. ADC / AUDIO OUTPUT
8. VIDEO OUTPUT
9. VOLUMES / RENAME PATHS
10. TRIGGERS / IR / RS-232
11. DISPLAYS / TIMEOUT
12. SAVE / RESTORE SETTINGS
13. LOCKOUT / PASSWORDS
1. SET TIME / TIMERS
a. CURRENT TIME : 12:00 AM
b. CURRENT DAY : Sunday
c. TIME FORMAT : 12 Hr
d. ALL TIMERS : Disabled
e. SET MAIN TIMERS
f. SET ZONE2 TIMERS
g. SET ZONE3 TIMERS