Anthem Audio AVM 30-HD - Manual (Page 36)

28
3. SETUP MENU
continued …
Highlighting ‘f. DVD1’ in menu 5 then pressing SELECT displays this menu – the other submenus are similar:
Rename:
The factory assigned Source names that appear on the Front Panel Display and the On-Screen Display can
be changed to another name, up to six characters long. The following characters are available:
A, B, C....Z, a, b, c....z, blank, dash (–), period (.), slash (/), 0, 1, 2....9, colon (:).
After highlighting the RENAME line, press SELECT and use the buttons to move from character to
character, then use the buttons or rotate the Master Control Knob to change the character. It is also
possible to rename ‘ZONE2’, ‘ZONE3’, and ‘RECORD’ – see section 3.9.
Scaler Input (applies to MAIN only):
Assign which input is used by the video processor when the Source is selected – any HDMI, Component
video, S-Video input, or ‘None’. Before setting this, be sure that you have read section 2.1. Note that if
S-Video is selected, the input connection is the one specified in e. S-VIDEO IN.
HDMI Repeater:
If an HDMI input is assigned correctly yet it doesn’t work, try changing this setting to ‘No’.
Component, S-Video, Composite Video Inputs:
Assign which video input (or ‘None’) is used for unprocessed video switching when the Source is selected,
including in ZONE2, ZONE3, and REC.
5f. DVD1 SETUP / PRESETS
a. RENAME : DVD1
b. SCALER INPUT : HDMI1
c. HDMI REPEATER : Yes
d. COMPONENT VIDEO IN : 1
e.
S-VIDEO IN : DVD
f. COMPOSITE VIDEO IN : DVD
g.
AUDIO IN : Dig HDMI
h. AUTO DIG : No
i. HDMI 6CH MAP : NA
j. MUTING : Med
k. EQ : LF +0.0 dB HF +0.0 dB
l. SPEAKER CONFIG : Cinema
m. LIP-SYNC DELAY : 0.0 ms
- - - - - - - MODE PRESETS - - - - - - -
n.
6.0 : PLIIx Movie
o. 2.0 : AnthemLogic-Cin
p. 2.0-Sur : PLIIx Movie
q. DD-5.1 : PLIIx Movie
r. DD-EX : PLIIx Movie
s. DTS-5.1 : Neo:6
t. DTS-ES : DTS-ES Matrix