KT&C KPC-ZA360WN - Manual (Page 14)

7 . I n s t a l l a t i o n
External D&N Input / Output
• It can be switched to DAY mode or NIGHT mode by receiving the signal from
external light sensor or IR LED LAMP.
when D&N Mode is set " EXTERNAL" on the OSD menu of the Camera.
• It can be sent signal to other equipment like as IR LED lamp. In this case,
IR LED lamp can turn on using this signal.
J705
① Day/Night EXT
② GND
J706
① Day/Night Out
② GND
• This feature is available while using without case model.
14 15
High(+5V) : NIGHT
LOW(GND) : DAY
High(+3.3V) : IR LED ON(NIGHT)
LOW(GND) : IR LED OFF(DAY)