KT&C KPC-ZA360WN - Manual (Page 27)

8 . O p e r a t i n g C a m e r a
Sub-Menu : DAY & NIGHT
• Select desired operation mode.
• COLOR : Day fix mode.
• BW : Night fix mode.
• AUTO : Automatically changes COLOR/BW mode according to
illuminance.
• EXTERNAL : Changes COLOR/BW mode according to external input signal.
B/W(HIGH, +5V) COLOR(LOW, GND)
1. D&N MODE
• SENSOR : Detect lighting conditions by photo-sensor.
• VIDEO : Detect lighting conditions by video level.
• AUTO : Automatically detect lighting conditions by photo-sensor & video
level.
2. DETECT MODE
• Sets conversion time of IR cut filter while in automatic mode.
• Can be adjusted from 0 sec to 10 sec.
3. DWELL TIME
• Sets turnover level from COLOR to BW while in AUTO Mode.
• Can be adjusted from 1 Lux to 90 Lux.
• It can be adjusted under sets SENSOR mode.
4. D→N LEVEL
Sets up the level higher while installing into the outdoor housing.
DAY & NIGHT
D&N MODE … AUTO
DETECT MODE … SENSOR
DWELL TIME … 1 SEC
D→N LEVEL … 1 Lux
N→D LEVEL … 10 Lux
BURST(NIGHT) … ON
INITIAL
RETURN
Sets up the level higher while installing into the outdoor housing.
28 29