KT&C KPC-ZA360WN - Manual (Page 34)

8 . O p e r a t i n g C a m e r a
SPECIAL Sub-Menu : DISPLAY
1. CAM ID : Displays camera ID on ⑪ of the screen.
2. CAM TITLE : Displays camera title on ⑨ of the screen.
3. CAM STATE : Displays camera state on ① ~ ⑦ of the screen.
4. ZOOM RATIO : Displays zoom ratio on ⑩ of the screen.
5. MOTION MSG( MD ) : Displays MD character on ⑧ of the screen, when
the motion is detected.
6. STANDBY : Displays system waiting message on ⑫ of the screen,
when power on.
7. POWER ON MSG : Displays system information on ⑬ of the screen,
when power on.
8. INITIAL
• Initializes the changed category in SPECIAL menu.
• Press the NEAR/FAR button to confirm.
Use this feature to display the Function-OSD on the screen.
DISPLAY
CAM ID … ON
CAM TITLE … ON
CAM STATE … ON
ZOOM RATIO … ON
MOTION MSG( MD ) … ON
POWER ON MSG … OFF
STANDBY … ON
INITIAL
RETURN
34 35
36x
Dx360