KT&C KPC-ZA360WN - Manual (Page 33)

8 . O p e r a t i n g C a m e r a
SPECIAL Sub-Menu : PRIVACY
1. ZONE NO
• Select the privacy mask zone number(1 ~ 15).
2. CONTROL
• Select desired masking effect.
• OFF: disable privacy zone as mask or mosaic.
• MASK: enable privacy zone as mask.
• MOSAIC : enable privacy zone as mosaic.
3. H START
• Set the horizontal starting point of privacy zone(0 ~ 180).
4. V START
• Set the vertical starting point of privacy zone(0 ~ 140).
5. H WIDTH
• Set the width of privacy zone(0 ~ 220).
6. V HEIGHT
• Set the height of privacy zone(0 ~ 180).
7. MASK COLOR
• Configure desired mask color(not mosaic).
• Up to eight different colors are supported.
BLACK/BLUE/RED/GREEN/YELLOW/GRAY1/GRAY2/WHITE
8. INITIAL
• Initializes the changed category in PRIVACY menu.
• Press the NEAR/FAR button to confirm.
PRIVACY
ZONE NO … 3
CONTROL … MASK
H START … 10
V START … 30
H WIDTH … 200
V HEIGHT … 110
MASK COLOR … BLACK
INITIAL
RETURN
34 35