CNB HDS4848E User Manual

Page 32

Advertising
background image


31

2-4-2. MENU > RECORD > Record
In Record, general recording options can be selected including overwrite, resolution, speed,
recording quality and etc.

Overwrite: Select Overwrite to overwrite recorded HDD data when it is full.

Auto Deletion(days): Turn on Auto Deletion to delete any data older than the defined days

automatically.

Resolution: Select recording resolution.

Time Record: Set ips/quality for continuous recording

Event Record: Set ips/quality for event recording

Emergency Record: Set ips/quality for emergency recording mode.

Note

: The ips needs to be set higher than 1ips for Audio recording at D1 or Half D1 recording

option, otherwise there would be a time delay between recorded Audio and Video sync.

In Event, pre and post recording options for Event can be set.

Pre-Event Duration: Video Images occurred right before an Event can be recorded by setting

Pre-Event under Event Mode. Duration Pre-Event recording can be set using Pre-Event(sec) upto
30 seconds.

Emergency Record Duration: Time duration can be set for Emergency recording from 5

seconds to 30 minute or continuously by selecting No Limit option.

Event Record Duration: Set recording duration for events up to 30 minutes.







Advertising
This manual is related to the following products: