CNB HDS4848E - Manual (Page 48)

47
Chapter 4. Remote Software – Web Viewer
User can access to use DVR’s Setup, Live Web Monitoring, Playback functions through Internet
Explorer.
Note : Before using the remote software, refer to a customer card in the package to download
the software. Please install the software on your PC once you download it.
1. Login
User can access to the DVR’s Remote Monitoring System if user inputs DVR’s IP address or its
registered hostname at Internet Explorer’s address bar.
e.g. Web port is 80(Default value) –
http://hostname.autoipset.com or 211.104.176.143
e.g. Web port is not the default value – http://hostname.autoipset.com
:
Web port or
211.104.176.143
:
Web port e.g. http://hostname.autoipset.com
:
8080 or
211.104.176.143
:
8080
Port numbers can be checked at DVR MENU > Network > Address > Port
At the DVR’s login page, User should input correct ID, Password, and Port Number in order to use
Live or Playback function.
z ID : DVR’s Administrator ID or User ID (Default ID: admin or user)
z Password : DVR’s Password for administrator or user (Default Password : “1111”)
z Port Number : DVR’s Port Number (Default Value : 10101)
*If you need more information about Port Number, please check the following
manual section. - “2-5-1. MENU > Network > Address > Port “
z Live : Live Web Monitoring
z Playback : Search and Play the DVR’s recorded data