CNB HDS4848E - Manual (Page 33)

32
In Schedule, fully detailed and specified recording schedules can be set by day, time, modes,
cameras and recording options.
Press
to add a new schedule. To remove an existing schedule, press next to it. Press
Setting to set recording options.
•
Use Default Setting: Check Use Default Setting to follow main recording setting under
Record menu.
2-4-3. MENU > RECORD > Utilities
In Recording Status, current recording options and status are displayed. The list will show
Recording Frames, Video Quality, Resolution and Audio recording (o/x) in order.
In Storage Capacity, estimated HDD usage and recording period can be calculated. Press
Calculate once resolutions, ips, number of cameras and quality are set. The recording period is
calculated based the size of HDD installed.
The GB size shows the HDD size requires for a day recording. Day and Hours shows the period
can be recorded based on the installed HDD size.
Note : The calculation results show approximate data only. Same frame rate and video quality
does not guarantee same storage size and recording duration. This is due to the variety of
conditions on images such as more/less colors or more/less movements. This situational variance
will affect the file sizes more at lower frame rate settings.
Note : Changes Ips manually. It does not change Ips according to the change of resolution.
Note : approximate size for each resolution – CIF: 360X240, Half D1: 720x240, D1: 720x480