CNB INS1000 - Manual (Page 14)

XNET Network Video Server User’s Guide
Private IP network using IP-sharing-device] .
②
3.2. Connecting to xDSL/Cable Modem
1. Follow through steps 1 to 4 in Section 2.5 to assign IP address and other network parameters
to XNET.
2. Install XNET and connect it to xDSL or Cable modem as in Figure 3-2.
XNET
IP Network
(LAN/WAN
xDSL/
Cable
Modem
Client
Figure 3-2. Connecting the XNET to ADSL Modem
When fixed IP address is assigned to the xDSL or Cable modem, follow the same way as
assigning IP address for the case of LAN using IP-installer. To enable the notification of
the changed IP address to the user over e-mail when the IP address is changed in
floating IP environment, you have to assign the e-mail address when user name and
password are input using IP-installer.
(Management server provides a convenient
way of connecting to your network camera under dynamic IP environment.
Please refer to the Application note regarding “Management Server” in the CD.)
When connecting XNET to xDSL or Cable modem, usually regular LAN cable is
required. But since some modems has crossover connections, please contact your
service provider for detailed information.
14 of 44