CNB INS1000 - Manual (Page 30)

XNET Network Video Server User’s Guide
Field/Button
Sub Field
/Button
Description
Channel
Selection
Not applicable.
Channel
Sensitivity
Set the sensitivity in motion detection for each channel. 1 is
the most sensitive, and 10 is the least sensitive.
Set up to 3 the motion detection zone
Region 1, 2,
or 3
Enable each zone by checking the box at the left of each
Region.
To set the region :
1. Click on START and click on a box overlaid on the
video
2. Click on END and click on a box overlaid on the video.
3. The defined motion detection zone will be indicated
with corresponding colors.
Legend of the color :
region 1 : red, region 2 : green, region3 : blue.
START Enable selection of rectangular zone start.
END Enable selection of rectangular zone end.
SELECT Click on this button and click on desired rectangle to add or
delete the rectangular region to the motion detection zone.
Percentage This value controls the sensitivity of each region.
1 is the most sensitive and 100 is the least sensitive
Motion Region
Setup
RESET Clears the start & end point to (0,0) & (0,0)
SAVE Save the setup parameters.
30 of 44