CNB INS1000 - Manual (Page 19)

XNET Network Video Server User’s Guide
Input Video This filed is set by the factory
Video Size
Select a video size for transmission-
z NTSC(30 fps Max.) : 176x144/352x240/704x480.
z PAL/SECAM (25 fps Max.) : 176x144/352x288/704x576
Max upload
rate
Assign maximum bandwidth of the uplink for the network
connected to XNET.
Frame rate
Assign number of video frames to be transmitted for each
second. You can improve picture quality by lowering frame
rate for the same bandwidth.
Video rate Assign bandwidth for transmitting video data.
Audio rate
Assign bandwidth for transmitting audio data. Audio data is
not transmitted if you select “NA”
Check
After you finish set up of video and audio for all the channels,
click on this box to obtain the possible maximum number of
users (Possible Max Users) and remaining network
bandwidth (Remained) remaining when possible maximum
users are connected.
Possible Max
Users
It shows the number of maximum simultaneous connections
for the network connection set-up.
Remained
It shows the network bandwidth remaining when Possible
Max Users are connected.
Video Quality
& Bandwidth
Control
Limited users
Useful network bandwidth varies according to the condition of
the network. This parameter is used to limit the number of the
simultaneous connections below the number shown in
Possible Max Users.
Save
Save the set-up parameters when the set-up parameters are
done.
19 of 44