Comprehensive CSW-VGA211 - Manual (Page 3)

1
1 Introduction
Congratulations on purchasing your CSW-VGA211 Automatic VGA / Audio
Switcher, which is ideal for:
Automatic computer and presentation VGA / XGA routing
Presentation systems with wall plates
The package includes the following items:
CSW-VGA211 Automatic VGA / Audio Switcher
Power adapter (12V DC input) and this user manual
2 Getting Started
We recommend that you:
Unpack the equipment carefully and save the original box and packaging
materials for possible future shipment
Review the contents of this user manual
3 Overview
Your CSW-VGA211 is a high performance 2x1 automatic switcher for
VGA/SVGA/XGA/UXGA and stereo audio signals. The CSW-VGA211
detects the presence of the active VGA-type input signal from either IN 1 (the
default 1 ) or IN 2—depending on how both DEFAULT SELECT switches 2 are
set, as section 5.2 describes—and automatically routes it to the acceptor
connected to the VGA OUT and the AUDIO OUT connectors. In addition,
the CSW-VGA211:
With its video bandwidth exceeding 400MHz, ensures transparent
operation at the highest resolutions
Automatically switches the stereo audio signal with the video signal
(audio-follow-video) when switching the active input to the output
Includes ID BIT control 3
Includes a pair of DEFAULT SELECT switches on the underside
for selecting the default VGA master source signal
1 That is, both DEFAULT SELECT switches on the underside are factory preset to IN 1
2 Both DEFAULT SELECT switches MUST be set to the identical IN #
3 Sometimes notebook computers refuse to output a VGA signal to an external VGA monitor. By setting the ID BIT to ON,
the notebook will output to an external VGA monitor