Comprehensive CSW-VGA211 - Manual (Page 4)

2
Includes a looping XGA input with a loop termination switch
Comes with contact closure remote control for forced operation
Uses active switching and has very selective sync detection and
reconstruction circuitry
To achieve the best performance:
Connect only good quality connection cables, thus avoiding interference,
deterioration in signal quality due to poor matching, and elevated noise-
levels (often associated with low quality cables)
Avoid interference from neighboring electrical appliances and position your
machine away from moisture, excessive sunlight and dust
Caution – No operator-serviceable parts inside unit.
Warning – Use only the input power wall adapter that is
provided with this unit.
Warning – Disconnect power and unplug unit from wall
before installing or removing device or servicing unit.
4 Your CSW-VGA211 Automatic VGA / Audio Switcher
Figure 1 and Table 1 define the topside of the CSW-VGA211 Automatic
VGA / Audio Switcher:
Figure 1: CSW-VGA211 Automatic VGA / Audio Switcher Topside